Tp1 Temperature Controller for Transformer Protect

Posted on

  • Model NO.: TP1
  • Type: Temperature Fuse
  • Shape: Tablet
  • Standard: UL
  • Trademark: HXPEE
  • Origin: China
  • Breaking Capacity: High
  • Usaga: Electronic
  • Fusing Speed: F
  • Rated Current: 2.5ampere, 10ampere
  • Specification: RoHs
  • HS Code: 903210

Tp1 Temperature Controller for Transformer Protect
Tp1 Temperature Controller for Transformer Protect
Tp1 Temperature Controller for Transformer Protect
Using scope:
Applies to the fractional electric motor, coils, liquid pumps, fluorescent ballast, the washer electrical machinery, the air conditioner electrical machinery, the transformer, the illumination lamps and lanterns, the automobile electrical machinery and similar household electrical appliances for temperature control and overheat protector.    
       
Best seller point:
Diamond shape, small size, easy for installation.
Good pressure resistance and high switching capacity
Rapid response to high-sensitive temperature and current

Key Technical Parameters:
Rated voltage: 50/60HZ, 250V, AC
Nominal current: 2.5 (1.6) A,/10 (6.3) A ,COS =1.0 (0.6)
Rated opening temperature range: +60 ºC ~+160 ºC, take 5 ºC as a grade
Resetting temperature range: lower than the open temperature 30ºC±15K
Type TP1
Rated Voltage:50/60HZ 220-250V
Rated Current COSΦ=1.0 2.5A 10.0A
COSΦ=0.6 1.6A 6.3A
AC Max.load
AC COSø=1.0		 500V 50/60HZ 3.5A 8.0A
380V 50/60HZ 4.0A 10.5A
250V 50/60HZ 6.3A 16A
110V 50/60HZ 10.0A 36.0A
DC Max.load 60V 1.0A 4.0A
42V 1.2A 4.8A
6V 12V 24V 1.5A 6.0A
Contact arrangement Normally Closed  Normally Open
Rated Open temp.range +60ºC~+160ºC,In steps of 5ºC
Tolerance ±5K ±8K ±10K
Resetting temperature Lower than rated open temp minus(5ºC~+70ºC)
Resetting temp.tolerance ±15K
Contact resistance ≤50m
Proof tracking index PT1 175
Class protection agains electric shock ClassI
Degree of protection IP00
Reset characteristics for cut-out action Type 3 action
Limited short-circuit capability 250V~200A,Fuse rated current 15A
Endurance 10000
Temp.limits of the switch head +180ºC
Insulation class of connecting leads A,E,B,F,H is available on request.
Cross section of the connecting leads 0.2 0.3 0.5mm2 or on request 0.5 0.75mm2 or on request
Housing insulation Different heat shrink sleeve of insulation class or PBT plastic housing is available on request
Dielectric Strength AC 1500V 50/60HZ 1MIN
Marking e.g.Front side:Tp1(appr symbol)
Basis side:Hx.TP1
2.5(1.6) A220~250V		 e.g.Front side:Tp1(appr symbol)
Basis side:Hx.TP1
10(6.3) A220~250V

 

Toroidal Coil Inductors

Cutout Fuse Co., Ltd. , http://www.nsindoorfuse.com