How to use the graphics card power adapter?

For independent power supply graphics cards, the power supply interface of the graphics card must be connected to the chassis power supply by the power cable. However, when there is no corresponding power interface on the chassis power supply, it is necessary to connect the power supply cable.

) The general graphics card has a 4D to 6-pin power adapter cable. The 6-pin end of the patch cord is directly inserted into the power connector of the graphics card, and the end of the large 4D type is the corresponding interface connected to the chassis power supply.

2) After the graphics card is inserted into the motherboard, you need to find the power connector of the double 6 pins on the graphics card. If the graphics card is 6-pin, it will be connected to 6-pin. If the video card has 8 pins, it will use 4D to 8-pin.

3) After clearing the 6-pin 4D of the power supply, insert one end of the 6-pin into the graphics card, and then use the 4D end to find the corresponding 4D power connector in the power cable of the chassis.

4) After the search is completed, plug in the corresponding connection, be sure to insert it in place, and finally check if the line is loose, so that the power adapter connection of the graphics card is completed.