In 2014, there were two varieties of LED phosphors exported from Changshu, including green LED phosphors and yellow LED phosphors, of which green LED phosphors accounted for 51.4% (by weight) and yellow LED phosphors accounted for 48.6% (by weight). ). In 2014, the LED phosphors exported from Changshu were mainly exported to Hong Kong and the United States, accounting for 50% and 47.9% of the total (by weight) respectively. From the price point of view, the price of green LED phosphors is much higher than the price of yellow LED phosphors. In 2014, the average unit price of green LED phosphors exported from Changshu was about 4.6 times the average unit price of yellow LED phosphors.
Changshu Inspection and Quarantine Bureau implemented the electronic supervision mode for export LED phosphor production enterprises in Changshu, and implemented paperless inspection, which not only speeded up the inspection release rate, but also effectively reduced the burden on enterprises and greatly facilitated enterprises. This complies with the fast and efficient demand for import and export trade and promotes the healthy development of the company.
Cosmetic Instrument Vibration Motor Mainly used in cosmetic instrument, such as instrument, cleansing essence introducing vibration meter, wash a face, facial massage, hairdressing instrument, etc.
Operating temperature range:
Cosmetic Instrument Vibration Motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a Cosmetic Instrument Vibration Motoris used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
Cosmetic Instrument Vibration Motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.
Cosmetic Instrument Vibration Motor
Cosmetic Instrument Vibration Motor,Face Brush Vibration Motor,Electric Cosmetic Instrument Vibration Motor,Cosmetic Instrument Mini Vibration Motor
Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com